Electroluminescent panel manufacturer

Electroluminescent panel manufacturer

Make the difference between all electroluminescent Panels

I. An electroluminescent panel can be manufactured in two different ways

  • Standard panel

Standard panel

An electroluminescent standard panel is a basic device that can have many different use such as back-lights, light stickers or strips, without animation. An electroluminescent panel is waterproofed, standard sized and prepared by the manufacturer giving it the right properties to be applied on a car, laptop, textiles and for architectural use (design and safety). By the simple fact of connecting it to a power supply unit, the film can be used as a flexible and flat lamp. Generally, adhesive installation is easy and does not require special technical skills. Panels can be purchased at a very attractive price and, due to its low consumption, the ownership cost is divided by 3 compared to a regular bulb. In addition, standard panels can be conditioned in different sizes and for all volume order requests.

  • Professional panel

Professionnal panel

The electroluminescent professional panel  is a more or less complex patchwork establishing a motion display. Theoretically, vinyl films are like a screen display with variable definition starting from 2 units pixels to an infinite ignition. This equipment is intended for professional installers who will be able to work with the product once they complete the Electroluminescent Store Certification. The potential applications are countless (e.q. advertising screen monitor.). Companies design their projects on a special apps dedicated to panels, films or magnets.

Electroluminescent car wrap example video

II. Power consumption

Electroluminescent professional panel's consumption varies depending on the display ignitions. An Electroluminescent sheet is designed as a flexible powered surface starting from few inches going to 3000 square inches.electroluminescent consummation

Watts consumption scheme

Performance comparison between LED and electroluminescent panel

III. Manufacture

An electroluminescent standard panel is a design complex tool and a flexible screen display ready for immediate use without transformation. They are used by the general public but also by professionals in pro rate, for projects that do not require complex animation. It is not possible to cut a panel hosted professional, however it is possible to cut a standard electroluminescent panel with a cutter or scissors.

Electroluminescent plotter training

An Electroluminescent panel is powered by flat copper wires so it should not be altered by cutting. However, if you need an outside or water-resistant equipment, it is necessary to print the logo on a electroluminescent sticker without cutting shapes on the standard panel. Looking for a professional solution is the best way to maintain a project sustainable and secure.

IV. Life

Life of an electroluminescent professional panel does not technically end, but it will rather suffer of the gloss level decomposition. The lamp turns slower in milliseconds. The Electroluminescent provider network adhesive printing center is installed near Death Valley, one of driest places in the world. The Panel remains functional over 9,000 hours at a mean temperature of 115 ° F or 45 ° C and petrified by the ice freezer.

Electroluminescent warm test

In Death Valley, electroluminescent panel remain functional over 9,000 hours at a mean temperature of 115 ° FElectroluminescent light ice cube

Standard panel freezed on ice still does the job

V. Health

Regardless of US standards and professional quality of electroluminescent panel, we also distinguish the subfamilies of leaf light. The origin and conformity of the panels has to be carefully controlled as they usually are sold from emerging countries which are also specialized in counterfeiting. The potential high variation of phosphorus will split in half the panel's life and can be extremely harmful. It is a toxic substance that is the object of a government circular for it to be banned from the public sale because of its lethal liposoluble properties. If you have any doubts about the origin of a film, do not touch it because the phosphorus passes through the integument of the skin. It is highly recommended to always use Americans manufacturers.

4 Comments
  • Gwendolyn
    Posted at 21:53h, 19 March Reply

    I found your blog website on google and check several of your early posts. Continue to keep up the really very good operate. I just extra up your RSS feed to my MSN News Reader. Looking for forward to reading much more from you later on!?

  • Nauru
    Posted at 19:36h, 20 March Reply

    Thanks , I’ve recently been searching for information about this subject for a while and yours is the best I’ve came upon till now. However, what concerning the conclusion? Are you positive in regards to the source?

  • ELISA
    Posted at 20:28h, 20 March Reply

    Thanks, for your feedback all. We will give you more informations this springs.

  • karen
    Posted at 21:22h, 29 March Reply

    As a Newbie, I am always searching online for articles that can aid me. Thank you

Post A Comment