Illuminating coat and glow paint

17 Sep Illuminating coat and glow paint

Epoxy glow paint all surface manual

• Prepare surface by lightly sanding area with a sanding pad
• Wipe area clean with enclosed alcohol pad
• Mask any adjoining area not to be glow painted
• Apply white primer to area with paintbrush
• Allow to dry fully, 15 to 45 minutes depending upon temperature
• Put jar B into jar A, use wooden stick to ensure all jar B is transferred into jar A
• Attach mixing wand into the hand drill and thoroughly mix product for approximately 1 minute
• Use a paintbrush to apply product thickly onto desired area within 30 minutes
• Dries to touch in 6 hours, allow to dry for 24 hours before use

Note

Always mix and use entire product as proportions need to be maintained. Product will begin to cure after 30 minutes - based on 70 degree ambient temp - Jar will get hot as product begins to cure. Excess mixed product cannot be reused onces cured.

Applications tips 

- For round and oval shaped tools paint in a vertical position
- Mask areas not to be glow painted
- Sprinkle sand onto surface after brushing for a non-slip grip

Clean up

Clean skin with soap and water. Tools and equipment should be cleaned immediately with MEK, or xylene

Buy glow paint